cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
915
Views
0
Helpful
5
Replies

upgrading PIX 6.1(3) to 6.3(5)

ibrahim_hassan
Level 1
Level 1

Dear all,

i need to upgrade software as in the subject.

i need the steps as well as configuartion file changes.

Thanks,

5 Replies 5

javzone
Level 1
Level 1

Upgrading from 6.1 to 6.3 wouldn't have any configuration changes.

1) Save the config to tftp server

pixfirewall# write net "ip add":pixconfig

2) Copy the bin file frm tftp to pix

pixfirewall#copy tftp flash

Address or name of remote host [127.0.0.1]? "IP add of tftp server"

Source file name [cdisk]? pix635.bin

3) reload the pix

pixfirewall#reload

if failover is configured on the box.

use #no failover

upgrade on pri, secondary unit

after upgrading on both units issue #failover

HTH

i need to know how to convert the configuration file :

for example,

  conduit permit tcp host x.x.x.x eq www any

to be aplicable on 6.3(5)

lreger
Level 1
Level 1

ex:

where access list 101 is your outside access list.

access-list 101 permit tcp any host 62.192.84.90 eq www

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: