04-07-2009 02:04 AM - edited 03-11-2019 08:15 AM
Hello people-
I have a 5510 with: 1 outside, 1 inside and a DMZ configured which has sec lvl of 50.
I have installed an IAS and I want to use it to authenticate when somebody connects to the firewall.
I am using SSH and I tried setting up the RADIUS but it seems I can t get it to work and teh debug does not disply any output.
Help!!!
!!! Sorry , the RADIUS sits in teh DMZ!
Thx
Vlad
Solved! Go to Solution.
04-07-2009 05:45 AM
Here's a link to help you out:
HTH,
John
04-07-2009 05:45 AM
Here's a link to help you out:
HTH,
John
04-08-2009 09:18 AM
Thanks John,
I solved this , after realising that I was telling to the firewall the wrong interface on which the radius is.
Regards,
Vlad
04-08-2009 09:23 AM
Glad to hear it! Thanks for the rating!
John
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: