Solved: IAS on Win2k3 with ASA 5510 - Cisco Community

328

Views

0

Helpful

3

Replies

Hello people-

I have a 5510 with: 1 outside, 1 inside and a DMZ configured which has sec lvl of 50.

I have installed an IAS and I want to use it to authenticate when somebody connects to the firewall.

I am using SSH and I tried setting up the RADIUS but it seems I can t get it to work and teh debug does not disply any output.

Help!!!

!!! Sorry , the RADIUS sits in teh DMZ!

Thx

Vlad

1 Accepted Solution

Accepted Solutions

Here's a link to help you out:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml

HTH,

John

HTH, John *** Please rate all useful posts ***

View solution in original post

3 Replies 3

Here's a link to help you out:

http://www.cisco.com/en/US/products/hw/vpndevc/ps2030/products_configuration_example09186a00807349e7.shtml

HTH,

John

HTH, John *** Please rate all useful posts ***

Thanks John,

I solved this , after realising that I was telling to the firewall the wrong interface on which the radius is.

Regards,

Vlad

Glad to hear it! Thanks for the rating!

John

HTH, John *** Please rate all useful posts ***

Review Cisco Networking products for a $25 gift card