Crash occured many times & always for the same reason
It sounds like CSCsr94207 but I have removed all ntp-server lines from config
Bug Details Bug #7 of 20 | < Previous | Next >
Bus error crash in NTP
Symptoms: The following bus error crash occurs:
Address Error (load or instruction fetch) exception, CPU signal 10, PC = 0xXXXXXX
Conditions: "ntp broadcast destination" must be configured. Just having an NTP peer configured is not enough to trigger this crash.
Cisco IOS Software, 2800 Software (C2800NM-ADVSECURITYK9-M), Version 12.4(20)T2, RELEASE SOFTWARE (fc4)
Technical Support: http://www.cisco.com/techsupport
Copyright (c) 1986-2009 by Cisco Systems, Inc.
Compiled Sat 31-Jan-09 13:46 by prod_rel_team
ROM: System Bootstrap, Version 12.3(8r)T7, RELEASE SOFTWARE (fc1)
rtrvpnsig uptime is 4 days, 7 hours, 20 minutes
System returned to ROM by bus error at PC 0x4169FF90, address 0x813B at 10:08:11 CET Fri Apr 3 2009
System restarted at 10:09:28 CET Fri Apr 3 2009
System image file is "flash:c2800nm-advsecurityk9-mz.124-20.T2.bin"
This product contains cryptographic features and is subject to United
States and local country laws governing import, export, transfer and
use. Delivery of Cisco cryptographic products does not imply
third-party authority to import, export, distribute or use encryption.
Importers, exporters, distributors and users are responsible for
compliance with U.S. and local country laws. By using this product you
agree to comply with applicable laws and regulations. If you are unable
to comply with U.S. and local laws, return this product immediately.
A summary of U.S. laws governing Cisco cryptographic products may be found at:
If you require further assistance please contact us by sending email to
Cisco 2821 (revision 53.51) with 247808K/14336K bytes of memory.
Processor board ID FCZ093274P9
4 FastEthernet interfaces
2 Gigabit Ethernet interfaces
1 Virtual Private Network (VPN) Module
DRAM configuration is 64 bits wide with parity enabled.
239K bytes of non-volatile configuration memory.
62592K bytes of ATA CompactFlash (Read/Write)
Configuration register is 0x2102