IPCCX 4.0(2) Standby server

Unanswered Question
Apr 7th, 2009
User Badges:

Hi All


I have a customer who has an IPCCX 4.0(2) custer with two nodes one active and one passive. The Customer now requires a DR Site. Since IPCCX is not designed for WAN Failover i had told him its not Advisable to have 1 node at Main Site and 1 node at DR. Instead i had proposed a Standby server at The DR site which would be ready with IPCCX installed and only when the site is down the configuration would be restored to this server and it would registed with a Call Manager Subscriber local to the site. What i need to know is whether the License that is already there with customer for their Existing IPCCX can be used for this standby server?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jonathan Schulenberg Sat, 04/11/2009 - 11:09
User Badges:
  • Super Bronze, 10000 points or more
  • Cisco Designated VIP,

    2017 IP Telephony

Licenses are not assigned to a specific MAC address in that version of CCX. You can load the license on any server you wish.


Keep an eye on the feature enhancements when CCX 8.0 is released early next year...

Actions

This Discussion