Time Warner Digital Phone won't dial out FX0

Unanswered Question
Apr 8th, 2009

I switched local phone service from AT&T (non centrex, no dialing 9) to Time Warner Digital Telephone. Callers are still able to get in, however, I can not dial out. I have a Cisco call manager 4.1, vic2-2FX0 in a 2800 series router. This is a remote office which connects to our main office via T1. Local calls come in and go out the FX0.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
teprevett Wed, 04/08/2009 - 10:45

here are the specs of the lines coming out of the Motorola SBV5322:

Line Type: 2wire

Hook State Signaling: Loop Start

Max Loop: 1000ft

DTMF Level Sensitivity: 0 to -20db

Speed Coding 64kbps PCM, u-law or A-law Commanding; supports G.711 and other low-rate vocoders.

Loss Plan receive (D/A) 4db; transmit (A/D)2db

Loss Plan Tolerance +- 1dB

I'm attatching my config



This Discussion