Unable to use Cisco Router 2851 as E1 RAS. Please help...

Unanswered Question
Apr 9th, 2009

Dear All,

I have one Cisco Router 2851 with following cards and features:

Cisco 2851-V/K9 - 2851 Voice Bundle

VWIC2-2MFT-T1/E1 - 2-Port 2nd Gen Multiflex Trunk Voice/WAN Int. Card - T1/E1

S28NSPSK9 - 12403 - IOS

PWR-2821-51-AC - 1 No

Router-SDM-CD - 1 No

PVDM2-48 - 1 No

MEM2800-256D-INC - 1 No

MEM2800-64-CF-INC - 1 No

ACS-2821-51-STAN - 1 No

Attaching Config details along with this.

Appreciate, if someone help me on this.

Regards,

Suresh

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
suresh_shrestha Thu, 04/09/2009 - 21:21

Hi,

I want to use this Router in replace to Patton device as RAS using E1 line for to access resources within that network dialing from the remote places.

Regards,

Suresh

Paolo Bevilacqua Fri, 04/10/2009 - 00:50

You need a digital modems card for that, PVDM2-xxDM, where xx = 12, 24 or 36.

You will also need one of the following interface cards:

NM-1CE1T1-PRI

NM-2CE1T1-PRI

HWIC-1CE1T1-PRI

HWIC-2CE1T1-PRI

The VWIC that you have is not supported with the Digital Modems.

Actions

This Discussion