6509 Show Env

Answered Question
Apr 9th, 2009

Hello,

Could you please post your comment about this output from show env.

Please focus on Power Supply 2 is that something wrong with that ?

power-supply 1:

power-supply 1 fan-fail: OK

power-supply 1 power-input: AC high

power-supply 1 power-output-fail: OK

power-supply 2:

power-supply 2 fan-fail: OK

power-supply 2 power-input: AC low

power-supply 2 power-output-fail: failed

By the way is there any documents which explains what is what in output of show env ?

Regards

Ersin

I have this problem too.
0 votes
Correct Answer by Leo Laohoo about 6 years 3 months ago

Explaination:

power-supply 2 fan-fail: OK < --- Means that the extraction fan is functioning properly.

power-supply 2 power-input: AC low < --- Means that instead of receiving full power, it's only getting half power.

power-supply 2 power-output-fail: failed < --- Means that 1 of the 2 power cables are either connected or powered.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4.7 (3 ratings)
Leo Laohoo Thu, 04/09/2009 - 18:41

Hi Ersin,

How many power cables are connected to PS2? 1 out of 2? Provide 2 power "juice" to PS2 and this should fix your problem.

ergonullu Thu, 04/09/2009 - 22:05

Besides solution

I was trying to understand the output of the show env command.For example what do you see there as a error

Regards

Ersin

ergonullu Thu, 04/09/2009 - 22:17

Besides solution

I was trying to understand the output of the show env command.For example what do you see there as a error

Regards

Ersin

Correct Answer
Leo Laohoo Thu, 04/09/2009 - 23:24

Explaination:

power-supply 2 fan-fail: OK < --- Means that the extraction fan is functioning properly.

power-supply 2 power-input: AC low < --- Means that instead of receiving full power, it's only getting half power.

power-supply 2 power-output-fail: failed < --- Means that 1 of the 2 power cables are either connected or powered.

ergonullu Thu, 04/09/2009 - 23:38

Thx for the answer

By the way do you know any documents which explains all show env arguments ?

Ersin

fly Tue, 02/21/2012 - 20:10

power-supply 1:

  power-supply 1 fan-fail: OK

  power-supply 1 power-input: DC<<<<<<<<<<<<<<<<<<<<   how can we explain this we replace a ac power WS-CAC-4000W-INT

  power-supply 1 power-output-fail: OK

power-supply 2:

  power-supply 2 fan-fail: OK

  power-supply 2 power-input: AC high

  power-supply 2 power-output-fail: OK

JS-access1#show power

system power redundancy mode = redundant

system power total =     3830.40 Watts (91.20 Amps @ 42V)

system power used =      2811.48 Watts (66.94 Amps @ 42V)

system power available = 1018.92 Watts (24.26 Amps @ 42V)

                        Power-Capacity PS-Fan Output Oper

PS   Type               Watts   A @42V Status Status State

---- ------------------ ------- ------ ------ ------ -----

1    WS-CAC-4000W-INT   3830.40 91.20  OK     OK     on

2    WS-CAC-4000W-INT   3795.12 90.36  OK     OK     on

                        Pwr-Allocated  Oper

Fan  Type               Watts   A @42V State

---- ------------------ ------- ------ -----

1    WS-C6509-E-FAN      150.36  3.58  OK

                        Pwr-Requested  Pwr-Allocated  Admin Oper

Leo Laohoo Tue, 02/21/2012 - 20:32
power-supply 1 power-input: DC<<<<<<<<<<<<<<<<<<<<   how can we explain this we replace a ac power WS-CAC-4000W-INT

Means that both of your power supplies are 4000 w and uses DC power input (instead of traditional AC).

fly Tue, 02/21/2012 - 20:46

But this power is AC power.  Why power input is DC

The other same model AC display AC input

Leo Laohoo Tue, 02/21/2012 - 22:16

Can you please post the output to the command "sh inventory | i 4000"

fly Wed, 02/22/2012 - 16:41

NAME: "PS 1 WS-CAC-4000W-INT", DESCR: "220v AC power supply, 4000 watt 1"
PID: WS-CAC-4000W-INT  , VID:    , SN: SON08131A4W


NAME: "PS 2 WS-CAC-4000W-INT", DESCR: "220v AC power supply, 4000 watt 2"

PID: WS-CAC-4000W-INT  , VID:    , SN: SNI0912BM5F

thankyou

fly Wed, 02/22/2012 - 17:50

it's really weird.

could be power problem

we install this power into other 6509 and 6513, it is also display " DC"

the software version should be different, i will check it.

it sems not affect switch running. but customer don't agree.

we will  find another power to test

thank you!

Jeremy

Actions

This Discussion