cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
302
Views
0
Helpful
1
Replies

ISR 877 to PIX 525 VPN RDP issue

darkbeatzz
Level 1
Level 1

Hi,

Appologies - Posted in wrong section. Have reposted in firwalling section.

I have a site-to-site VPN from a remote office to a HQ site. At the remote site I have an ISR 877 ADSL router(zone based firewall) and a PIX 523 (7.2) at the HQ site.

The problem is I can ping and connect to anything in the HQ site. But I can only ping from HQ to remote LAN(I need to be able to RDP).

I enabled logging on the polciy map and I can see traffic being logged on the console from HQ to remote LAN.

Routing is OK on the remote side as connectivity works from remote to HQ. Has anyone any ideas on this.

policy-map type inspect sdm-pol-VPNOutsideToInside-1

class type inspect sdm-cls-VPNOutsideToInside-10

pass log

have included configs, HELP!

1 Reply 1

omar.elmohri
Level 1
Level 1

Hi,

I encounter the same problem. But once doing a ping that can RDP with no problem.

Can you send me the like to the post on Firewalling section ?

Regards,

Omar

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community:

Innovations in Cisco Full Stack Observability - A new webinar from Cisco