I'm trying to run OSPF but when I try to configure it, this is what happens:

ALLEN-1.11.5-CoreSW(config)#router ospf 1

ALLEN-1.11.5-CoreSW(config)#

It has the IP BASE image. Do I need IP Services?

Here is a sh version:

ALLEN-1.11.5-CoreSW#sh ver

Cisco IOS Software, C3560 Software (C3560-IPBASE-M), Version 12.2(25)SEB4, RELEA

SE SOFTWARE (fc1)

Copyright (c) 1986-2005 by Cisco Systems, Inc.

Compiled Tue 30-Aug-05 14:19 by yenanh

ROM: Bootstrap program is C3560 boot loader

BOOTLDR: C3560 Boot Loader (C3560-HBOOT-M) Version 12.2(25r)SEC, RELEASE SOFTWAR

E (fc4)

ALLEN-1.11.5-CoreSW uptime is 3 days, 3 hours, 32 minutes

System returned to ROM by power-on

System image file is "flash:c3560-ipbase-mz.122-25.SEB4/c3560-ipbase-mz.122-25.S

EB4.bin"

cisco WS-C3560-24TS (PowerPC405) processor (revision D0) with 118784K/12280K byt

es of memory.

Processor board ID CAT1034ZHLB

Last reset from power-on

4 Virtual Ethernet interfaces

24 FastEthernet interfaces

2 Gigabit Ethernet interfaces

The password-recovery mechanism is enabled.

512K bytes of flash-simulated non-volatile configuration memory.

Base ethernet MAC Address : 00:19:2F:B3:F2:80

Motherboard assembly number : 73-9897-06

Power supply part number : 341-0097-02

Motherboard serial number : CAT10335QW4

Power supply serial number : AZS103003HV

Model revision number : D0

Motherboard revision number : A0

Model number : WS-C3560-24TS-S

System serial number : CAT1034ZHLB

Top Assembly Part Number : 800-26160-02

Top Assembly Revision Number : C0

Version ID : V02

CLEI Code Number : COMMG00ARB

Hardware Board Revision Number : 0x01

Switch Ports Model SW Version SW Image

------ ----- ----- ---------- ----------

* 1 26 WS-C3560-24TS 12.2(25)SEB4 C3560-IPBASE-M

Configuration register is 0xF