I have SIPURA SPA2100 and broadband router WRT54GS framewire v 7.5 , ata cordless phone .
First Approach: for me not worked
I have contected broadband modem ethernet cable to WRT54GS router. from WRT54GS LAN I contected to WAN of SPA2100.
and used another LAN of WRT54GS router to PC. and attached SPA 2100 phone jack 1 to my ATA phone.
After this i dailed " **** "then 110# , opened the browser tab and typed http://<Ip address> . after here i cannot open the web interface of SPA2100.
But I can open WRT54GS router web page.
Second Approach:not worked
I have contected broadband modem ethernet cable to SPA2100 adapter WAN. from SPA LAN I contected to WAN of WRT54GS router .
and used LAN of WRT54GS router to PC. and attached SPA 2100 phone jack 1 to my ATA phone. But here I hardly conect to internet.
After dailedly " **** "then 110# , opened the browser tab and typed http://<Ip address> . though i cant access the web interface of SPA2100.
Third Approach : not worked
connect Modem ethernet to WRT54GS router WAN,then conneted ethernet between WRT54GS router LAN and SPA2100 WAN .
and then plugged cable to PC LAN to SPA2100.
After several retry i can get Limited internet connection. though cant access the SPA2100 web interface.
I tried all process but I am not able to connect SPA2100.
Diconnected firewall while doing these steps.
.So, 1. can you please suggest me what are the appropiate steps should be take to configure.
. 2. Do i need to upgrade the Firmwire in my WRT54GS router r? if yes, how to upgrade and what is that file that I have to download?
Appretiate for any suggestions.
at first, try this
Q. I want to use a different computer to access the administration web server.
The address I entered did not work.
A. Use the Interactive Voice Response Menu to find out the Internet IP address.
Follow these steps:
1. Use a telephone connected to the Phone 1 port of the ATA device.
2. Press **** (in other words, press the star key four times).
3. After the greeting plays, press 110#.
4. Write down the IP address as it is announced.
5. Press 7932#.
6. Press 1 to enable WAN access to the administration web server. (maybe restart adapter)
7. Open the web browser on a networked computer.
8. Start Internet Explorer and enter the IP address of the ATA device.
and for check web port "Press 170#"