fax to mail problem

Unanswered Question

I had try fax to mail in a lab environment.

fax machine--1751V---E1 pri---2811---Exchange

i use the fax machine send a fax to 2811,and the 2811 router has received the fax then forward to Exchange's mailbox,it works.when i use Exchange OWA send a mail to fax=<phoneNumber>@2811.router.com,the fax machine on 1751V has detected a incoming call,when it receiving the fax,the fax machine prompt "memory is low".i try use WinXP fax service receive the fax,there are some error,prompt just recevice a part,not entire.how can i resolve the problem?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.

debug fax mta Output

*Apr 13 04:02:03.615: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_dot_check:

Not found the terminating Dot!

*Apr 13 04:02:03.615: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

state=3

*Apr 13 04:02:03.639: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

buffer offset=681, state=3

*Apr 13 04:02:03.639: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_dot_check:

Not found the terminating Dot!

*Apr 13 04:02:03.639: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

state=3

*Apr 13 04:02:03.639: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

buffer offset=738, state=3

*Apr 13 04:02:03.639: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_dot_check:

Not found the terminating Dot!

*Apr 13 04:02:03.639: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

state=3

*Apr 13 04:02:04.415: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_work_routine:

context(0x49D7C6F4), state=3

*Apr 13 04:02:05.087: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_dot_check:

Not found the terminating Dot!

*Apr 13 04:02:05.087: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

state=3

*Apr 13 04:02:05.091: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

buffer offset=57, state=3

*Apr 13 04:02:05.091: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_dot_check:

Not found the terminating Dot!

*Apr 13 04:02:05.091: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_buf_mgmt:

state=3

*Apr 13 04:02:10.239: //-1/xxxxxxxxxxxx/SMTPS/esmtp_server_engine_update_recipient_status:

faxmail status=7

*Apr 13 04:02:28.355: %ISDN-6-DISCONNECT: Interface Serial0/2/0:3 disconnected from 5555555 , call lasted 28 seconds

*Apr 13 04:02:28.387: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_get_statistics:

context(0x49D7C6F4), smtpStatus=14

*Apr 13 04:02:28.387: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_get_statistics:

context(0x49D7C6F4), smtpStatus=14

*Apr 13 04:02:28.387: //-1/xxxxxxxxxxxx/SMTPS/esmtp_server_engine_update_recipient_status:

faxmail status=27

*Apr 13 04:02:35.127: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_generate_notification:

context(0x49D7C6F4)

*Apr 13 04:02:35.127: //-1/A6347DB1800C/SMTPS/rejectMessage:

context(0x49D7C6F4),

mime: Total=6, Rejected=1, Ignored=3

*Apr 13 04:02:35.127: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_work_routine:

context(0x49D7C6F4), state=1

*Apr 13 04:02:35.611: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_work_routine:

Calling smtp verb: quit

*Apr 13 04:02:35.611: //-1/xxxxxxxxxxxx/SMTPS/esmtp_server_engine_closesocket:

Closing socket 1

*Apr 13 04:02:35.615: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_clear_state:

context(0x49D7C6F4)

*Apr 13 04:02:35.615: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_clear_state:

Freeing RECIPIENT context (envelope=fax=[email protected])

*Apr 13 04:02:35.615: //-1/A6347DB1800C/SMTPS/esmtp_server_engine_work_routine:

Freeing SMTP ctx at 0x49D7C6F4

*Apr 13 04:02:35.615: //-1/xxxxxxxxxxxx/SMTPS/esmtp_server_engine_work_routine:

context(0x0), state=-1

*Apr 13 04:02:35.615: //-1/xxxxxxxxxxxx/SMTPS/esmtp_server_engine_process:

context is freed

rock981119 Mon, 04/13/2009 - 17:42

what's problem about controller E1, In this lab We use FXO--CONN---FXS.

I think is something wrong with the e-mail transform to Fax.

Actions

This Discussion