04-13-2009 08:44 AM - edited 03-04-2019 04:21 AM
I have a gateway interface configured with ATM. I can see the interface is up on both side..pvc is configured as well but I cant reach it. cant ping it at all. What could be the reason for this?
04-13-2009 08:58 AM
Uzma,
I don't know exactly what your problem is. Please post the configuration.
Toshi
04-13-2009 11:00 AM
Uzma,
I'm not sure that why I got 1P!. Well,I don't want to presume things. Actually I had in mind about the default route missing from your configuration.
Toshi
04-13-2009 11:24 AM
Hello Toshi,
my guess is that if the ATM interface is not point-to-point, and/or ATM inverse ARP is disabled, a manual mapping is needed:
I usually use mapping also for point-to-point ATM subinterface
Something like this:
int atm4/0
no ip address
int atm4/0.100 point-to-point
ip address 10.82.16.1 255.255.255.252
pvc 10/100
protocol ip 10.82.16.2 broadcast
Hope to help
Giuseppe
04-13-2009 11:33 AM
Giuseppe,
That's nice. 5P!
I just want more information to help. That's why I asked for configuration.
Thanks
Toshi
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide