04-13-2009 08:44 AM - edited 03-04-2019 04:21 AM
I have a gateway interface configured with ATM. I can see the interface is up on both side..pvc is configured as well but I cant reach it. cant ping it at all. What could be the reason for this?
04-13-2009 08:58 AM
Uzma,
I don't know exactly what your problem is. Please post the configuration.
Toshi
04-13-2009 11:00 AM
Uzma,
I'm not sure that why I got 1P!. Well,I don't want to presume things. Actually I had in mind about the default route missing from your configuration.
Toshi
04-13-2009 11:24 AM
Hello Toshi,
my guess is that if the ATM interface is not point-to-point, and/or ATM inverse ARP is disabled, a manual mapping is needed:
I usually use mapping also for point-to-point ATM subinterface
Something like this:
int atm4/0
no ip address
int atm4/0.100 point-to-point
ip address 10.82.16.1 255.255.255.252
pvc 10/100
protocol ip 10.82.16.2 broadcast
Hope to help
Giuseppe
04-13-2009 11:33 AM
Giuseppe,
That's nice. 5P!
I just want more information to help. That's why I asked for configuration.
Thanks
Toshi
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: