Rob Huffman Mon, 04/13/2009 - 09:20
User Badges:
  • Super Red, 40000 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 IP Telephony, Unified Communications

Hi Carlos,


Just to add a note to the great tips from my friend Java.+5 points Java!


Upgrading Cisco Unity 4.x Software to the Shipping Version


http://www.cisco.com/en/US/docs/voice_ip_comm/unity/42/upgrade/guide/ex/ru_010.html#wp1334870



For upgrades from Cisco Unity 4.x to version 7.0(2), see the "Upgrading Cisco Unity 4.x Software to the Shipping 5.x Version" chapter of the Reconfiguration and Upgrade Guide for Cisco Unity. See also the "Installation and Upgrade Notes" section.




--------------------------------------------------------------------------------


Note The following links go to Release 5.x versions of the guide; all 5.x content applies to version 7.x as well.



--------------------------------------------------------------------------------


•Reconfiguration and Upgrade Guide for Cisco Unity Release 5.x (With IBM Lotus Domino) at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/dom/5xcurugdx.html.


•Reconfiguration and Upgrade Guide for Cisco Unity Release 5.x (With Microsoft Exchange) at http://www.cisco.com/en/US/docs/voice_ip_comm/unity/5x/upgrade/guide/ex/5xcurugex.html.




--------------------------------------------------------------------------------


Caution Upgrading from Cisco Unity 3.x directly to Cisco Unity 7.0(2) is not supported. You must upgrade to Cisco Unity 4.x first, then upgrade again from 4.x to 7.x.


http://www.cisco.com/en/US/docs/voice_ip_comm/unity/7x/release/notes/702curelnotes.html#wp47469




Hope this helps!

Rob


Actions

This Discussion