×

Warning message

  • Cisco Support Forums is in Read Only mode while the site is being migrated.
  • Cisco Support Forums is in Read Only mode while the site is being migrated.

Gateway loadbalance

Answered Question
Apr 13th, 2009
User Badges:

Hi experts,


we got 2 h323 voice gateway connected to the Call manager 4.1. we always notice that the calls will always be on the 1st gw then the 2nd gw will only be use when all the channels are used up. Can someone pls. help me how to loadbalance them?


tia

Correct Answer by Jaime Valencia about 8 years 4 months ago

very simple, add both GWs to same RG and configure circular algorithm

you probably have top-down right now


HTH


java


if this helps, please rate

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 5 (1 ratings)
Loading.
Correct Answer
Jaime Valencia Mon, 04/13/2009 - 17:42
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

very simple, add both GWs to same RG and configure circular algorithm

you probably have top-down right now


HTH


java


if this helps, please rate

redrobish Mon, 04/13/2009 - 17:56
User Badges:

thanks java.


currently the 2 GW are added on different RG name, each set to circular. Will put them on one RG name them test as you suggest


Another thing, will these setting be applicable to both incoming and outgoing? or just one? since the outgoing is not balancing the call, it;s always going out on the 1st GW.


thanks

Jaime Valencia Mon, 04/13/2009 - 20:27
User Badges:
  • Cisco Employee,
  • Hall of Fame,

    2011

just outgoing, you don't have control on incoming, that's telco business


HTH


java


if this helps, please rate

Actions

This Discussion