04-13-2009 04:53 PM - edited 03-15-2019 05:27 PM
Hi experts,
we got 2 h323 voice gateway connected to the Call manager 4.1. we always notice that the calls will always be on the 1st gw then the 2nd gw will only be use when all the channels are used up. Can someone pls. help me how to loadbalance them?
tia
Solved! Go to Solution.
04-13-2009 05:42 PM
very simple, add both GWs to same RG and configure circular algorithm
you probably have top-down right now
HTH
java
if this helps, please rate
04-13-2009 05:42 PM
very simple, add both GWs to same RG and configure circular algorithm
you probably have top-down right now
HTH
java
if this helps, please rate
04-13-2009 05:56 PM
thanks java.
currently the 2 GW are added on different RG name, each set to circular. Will put them on one RG name them test as you suggest
Another thing, will these setting be applicable to both incoming and outgoing? or just one? since the outgoing is not balancing the call, it;s always going out on the 1st GW.
thanks
04-13-2009 08:27 PM
just outgoing, you don't have control on incoming, that's telco business
HTH
java
if this helps, please rate
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide