04-14-2009 03:04 AM - edited 03-15-2019 05:27 PM
Hi,
I have configured a simbox connected with a BRI interface. Config:
interface BRI0/1/1
description SIMBOX
no ip address
isdn switch-type basic-net3
isdn overlap-receiving
isdn tei-negotiation first-call
isdn point-to-point-setup
isdn incoming-voice voice
isdn send-alerting
isdn sending-complete
isdn static-tei 0
isdn skipsend-idverify
The customer notices very bad quality and call drops. What can I do to make sure the quality is good and calls are not dropped? We use the same simbox for other customers, but they don't have any problem with it.
Greetz,
Wouter
04-14-2009 03:44 AM
Do you have compand-type a-law under voice-port ?
04-14-2009 03:56 AM
yes I have. NL for Holland
voice-port 0/1/1
compand-type a-law
cptone NL
04-14-2009 04:14 AM
Bring the issue to the simbox vendor then.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide