Dear Toshi,

I applied your configuration but it is not working,

Please check my configuration,

ip subnet-zero

ip routing

ip dhcp excluded-address 192.168.2.1

ip dhcp excluded-address 192.168.2.1 192.168.2.20

ip dhcp pool D_MKT

network 192.168.2.0 255.255.255.0

default-router 192.168.2.1

dns-server 192.168.1.17

domain-name 192.168.1.17

lease 8

ip dhcp-server 192.168.2.1

vlan 2

name MKT

interface FastEthernet0/8

switchport access vlan 2

switchport mode access

interface Vlan2

ip address 192.168.2.1 255.255.255.0

ip access-group 110 out

ip classless

access-list 110 permit ip 192.168.1.0 0.0.0.255 any

I applied ACL to permit different vlan users to get access on servers vlans...

Please HELP!

Regards,

Junaid

I applied ACL to permit different vlan users to get access on servers vlans... < --- And there's an explicit DENY ANY ANY at the end of the line.

Junaid ,

Let's modify things.

access-list 110 permit ip 192.168.1.0 0.0.0.255 any

access-list 110 permit udp any eq bootpc any

access-list 110 permit udp any eq bootps any

HTH,

Toshi

Dear Toshi,

Congratss!!

previous configuration started working,

Actually, the machine which i was using for testing, (its DHCP service was blocked),,

When i tried it with another Computer, it is getting Ip address and other information,

THANKS AGAIN..

Junaid

Junaid,

You're right. I got confused because the router generating traffic would not be blocked by outbound ACL.

Good job,

Toshi