NAT mail to new internal smart host

Unanswered Question

Hi all.

I have a PIX 515E. I have an old smart host server that I am retiring with an ip address of I have built a new smart host server with an ip of

My current working config on the pix is the following:

access-list 30 permit tcp any host eq smtp

static (inside,outside) tcp smtp smtp netmask 0 0

nat (inside) 2 0 0

When I tried testing the new server, I just replaced the ip address of with Our mail flowed for about 10 email messages but then stopped.

Am I missing something?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
srue Wed, 04/15/2009 - 06:25
User Badges:
  • Blue, 1500 points or more

no static (inside,outside) tcp smtp smtp netmask 0 0

static (inside,outside) tcp smtp smtp netmask 0 0

also, what is the purpose of the nat (inside) 2 statement..where is the 'global (outside) 2' statement?


This Discussion