AIR-BR1310G-A-K9-R with AIR-AP1131AG-A-K9 client?

Unanswered Question
Apr 14th, 2009

Hallo Community,

we have a customer who runs an bridge with two Aironet BR1310G Sys. S/W 12.4. Within the beam area there is an workshop what requires access for two or three workstations. Is it possible to use a AP1131G as "client" device because of cost reasons?

I could not find a hint in the documentation so far... Thank you!

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gamccall Tue, 04/14/2009 - 10:32

I believe you can set an 1131 as a WGB but not as a non-root bridge. For a WGB scenario, you'll need to make sure that your root bridge is set as "station-role root bridge wireless-clients" and your 1131 as "station-role workgroup-bridge".

You can try setting your 1131 as "station-role non-root" instead, but I don't think that mode is allowed on that hardware.

You should be able to pick up a used 1232 relatively cheap, if you prefer to stick with real bridging.

grupo-samadhi Tue, 04/14/2009 - 11:53

Thank you! To avoid any problems I stay with the bridging and look for some Aironet 1232.



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode