cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
338
Views
0
Helpful
2
Replies

ISDN call not working...interface up....debug result

saravanababu22
Level 1
Level 1

BRI2/0 is up, line protocol is up (spoofing)

Hardware is BRI

History table has a maximum of 100 entries for disconnected calls.

History table data is retained for a maximum of 15 Minutes for disconnected calls.

--------------------------------------------------------------------------------

Call Calling Called Remote Seconds Seconds Seconds Charges

Type Number Number Name Used Left Idle Units/Currency

--------------------------------------------------------------------------------

Out +6567689760 0 0

--------------------------------------------------------------------------------

ISDN BRI2/0 interface

dsl 8, interface ISDN Switchtype = basic-net3

Layer 1 Status:

ACTIVE

Layer 2 Status:

TEI = 64, Ces = 1, SAPI = 0, State = MULTIPLE_FRAME_ESTABLISHED

Layer 3 Status:

0 Active Layer 3 Call(s)

Activated dsl 8 CCBs = 0

The Free Channel Mask: 0x80000003

00:17:15: %ISDN-6-LAYER2UP: Layer 2 for Interface BR2/0, TEI 80 changed to up

000673: 00:17:25: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to up

000674: 00:17:25: %ISDN-6-CONNECT: Interface BRI2/0:1 is now connected to 006567689760

000675: 00:17:26: %LINK-3-UPDOWN: Interface BRI2/0:1, changed state to down

000676: 00:17:36: %ISDN-6-LAYER2DOWN: Layer 2 for Interface BR2/0, TEI 80 changed to down

can anyone help...

2 Replies 2

paolo bevilacqua
Hall of Fame
Hall of Fame

The interface connects ok, you likely have a ppp problem, check debug ppp neg, debug ppp auth.

rahul0904
Level 1
Level 1

can i see the config done

Getting Started

Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: