04-15-2009 06:45 AM - edited 07-03-2021 05:26 PM
recently I used the conversion tool to convert 5 AP's to LWAP. 3 were in one building/subnet and 2 were in 2 different buildings/subnets. The conversion tool said everything worked but when the ap's rebooted only one out of 5 actually connected to the controller. I had to go touch the other 4 and tell them the ip of the controller.
the one that came up was part of the 3 that lived in the same subnet.
I have DHCP setup across all scopes with option 43 and one of the controllers set as a master.
any thoughts???
thanks
04-15-2009 07:32 AM
It's probably too late now, but it would have been helpful to see the console logs from the AP's that failed to join the controller.
04-15-2009 08:10 AM
it happened monday morning and I fixed the last one yesterday morning.
04-15-2009 04:02 PM
Before you converted your AP's to LWAP, did you endable DNS and/or DHCP (Option 43 and/or Option 60)?
04-16-2009 07:02 AM
Option 43 in DHCP has been setup across all scopes.
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide