04-15-2009 07:47 AM
I just upgraded DFM to 3.1.3. When I look at the DFM portal page, the DFM Device Status says "Cannot retrieve Device Summary. Please see the DeviceManagement.log file for more information" I have looked at the log but I have no idea what it means. Please see the attachment.
Solved! Go to Solution.
04-15-2009 12:34 PM
Like I said, it may have been a timing issue. The daemons can take up to 30 minutes to fully initialize. Logging in to LMS before that can cause weird behavior.
04-15-2009 09:24 AM
There appears to be a process problem. Please post the output of the pdshow command.
04-15-2009 09:43 AM
04-15-2009 10:00 AM
This looks fine. Post the NMSROOT/log/dfmLogs/TIS/TISServer.log.
04-15-2009 10:11 AM
Here are the entries from today in TISServer.log. The rest of the info in the log is from months ago. If you want the whole thing, let me know.
15-Apr-2009|02:00:04.171|ERROR|TISServer|Thread-7|{TISDeviceOperationImpl}||.|Another bulk rediscover with id:6056 is already started in less than the required gap:5 mins
15-Apr-2009|09:13:20.851|ERROR|TISServer|main|{TISSchemaManager}||.|Auto mode value is true
15-Apr-2009|09:40:39.543|ERROR|TISServer|main|{TISSchemaManager}||.|Auto mode value is true
15-Apr-2009|09:56:15.563|ERROR|TISServer|main|{TISSchemaManager}||.|Auto mode value is true
04-15-2009 10:13 AM
Is the problem still occurring now? It looks like things have settled.
04-15-2009 10:21 AM
04-15-2009 10:27 AM
Can you launch DFM > Device Management > Discovery Status?
04-15-2009 10:32 AM
Yes, it opens fine and shows the Last Discovered time of 15-Apr-2009 02:02:xx for all the devices except two 4402's that show up as Unknown and always have because they aren't supported.
04-15-2009 10:44 AM
Then this just may be a sync problem with the portal. Try removing and re-adding that portlet.
04-15-2009 10:44 AM
Ok, I just logged with the SIU account and it looks fine. Maybe something happened with ACS integration when I did the upgrade?.? Should I re-register apps with ACS?
04-15-2009 10:57 AM
This should not be necessary. I would go back through ACS, though, and verify your user has all of the required permissions, and access to all of the required devices.
04-15-2009 12:26 PM
Went through ACS and everything looks good. Now, I've had the DFM portal open for the last 30 minutes and the Device status just started working. So I guess it's good to go.
04-15-2009 12:34 PM
Like I said, it may have been a timing issue. The daemons can take up to 30 minutes to fully initialize. Logging in to LMS before that can cause weird behavior.
04-15-2009 10:01 AM
Joe,
Here is the output of pdshow.
Thanks, Troy
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: