Pix 506e Configuration Help

Unanswered Question
Apr 15th, 2009


I'm using a single static IP from Verizon DSL and I'm looking to do the following:

1. Static IP to access a webserver (XXX.XXX.XXX.201)

2. Setup a DMZ zone to allow remote access to our phone system (xxx.xxx.x.2)

3. Allow the office work stations to go out onto the internet

Currently the pix configuration allows for everything on the inside to go out onto the internet.

This is my current pix configuration:

PIX Version 6.3(5)

interface ethernet0 auto

interface ethernet1 auto

nameif ethernet0 outside security0

nameif ethernet1 inside security100

enable password 8Ry2YjIyt7RRXU24 encrypted

passwd 2KFQnbNIdI.2KYOU encrypted

hostname pixfirewall

domain-name ciscopix.com

fixup protocol dns maximum-length 512

fixup protocol ftp 21

fixup protocol h323 h225 1720

fixup protocol h323 ras 1718-1719

fixup protocol http 80

fixup protocol rsh 514

fixup protocol rtsp 554

fixup protocol sip 5060

fixup protocol sip udp 5060

fixup protocol skinny 2000

fixup protocol smtp 25

fixup protocol sqlnet 1521

fixup protocol tftp 69


access-list inside_access_in permit ip any any

access-list inbound permit tcp any interface outside eq www

pager lines 24

mtu outside 1500

mtu inside 1500

ip address outside XXX.XX.XXX.XXX

ip address inside XXX.XXX.X.1

ip audit info action alarm

ip audit attack action alarm

pdm location inside

pdm location outside

pdm location XXX.XXX.X.201 inside

pdm logging informational 100

pdm history enable

arp timeout 14400

global (outside) 10 interface

nat (inside) 10 0 0

static (inside,outside) tcp interface www XXX.XXX.X.201 www netmask 0 0

access-group inside_access_in in interface inside

route outside XXX.XX.XXX.X 1

timeout xlate 0:05:00

timeout conn 1:00:00 half-closed 0:10:00 udp 0:02:00 rpc 0:10:00 h225 1:00:00

timeout h323 0:05:00 mgcp 0:05:00 sip 0:30:00 sip_media 0:02:00

timeout sip-disconnect 0:02:00 sip-invite 0:03:00

timeout uauth 0:05:00 absolute

aaa-server TACACS+ protocol tacacs+

aaa-server TACACS+ max-failed-attempts 3

aaa-server TACACS+ deadtime 10

aaa-server RADIUS protocol radius

aaa-server RADIUS max-failed-attempts 3

aaa-server RADIUS deadtime 10

aaa-server LOCAL protocol local

http server enable

http XXX.XXX.X.0 inside

no snmp-server location

no snmp-server contact

snmp-server community public

no snmp-server enable traps

floodguard enable

telnet timeout 5

ssh timeout 5

console timeout 0

dhcpd address XXX.XXX.X.3-XXX.XXX.X.100 inside

dhcpd dns XX.XXX.X.XX XX.XXX.X.XX

dhcpd lease 3600

dhcpd ping_timeout 750

dhcpd auto_config outside

dhcpd enable inside

terminal width 80


I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)


This Discussion