04-15-2009 12:45 PM - edited 03-06-2019 05:11 AM
Hello,
I am trying to configure vlan-base on a 3750ME interface but I get the following message:
vlan-based not allowed for non-layer-2 interface GigabitEthernet1/1/2
This interface is configured as a L2 trunk. The config is the follwing:
interface GigabitEthernet1/1/1
description 1000Base-SX a CoreVH
switchport trunk allowed vlan 1,136,173,199,212,251,252
switchport mode trunk
switchport nonegotiate
speed nonegotiate
What is more annoying is that the switch is allowing me to configure this vlan-base qos feature in another giga port (different module):
interface GigabitEthernet1/0/1
description a Sw Laboratorio 10.73.206.10
switchport trunk encapsulation dot1q
switchport trunk allowed vlan 1,173,212
switchport mode trunk
switchport nonegotiate
duplex full
mls qos vlan-based
The switch is a ME-C3750-24TE
The IOS version is: Version 12.2(25)SEE
The Giga modules are the following:
NAME: "GigabitEthernet1/0/1", DESCR: "100BaseFX SFP"
NAME: "GigabitEthernet1/0/2", DESCR: "100BaseFX SFP"
NAME: "GigabitEthernet1/1/1", DESCR: "1000BaseSX SFP"
NAME: "GigabitEthernet1/1/2", DESCR: "1000BaseLX SFP"
Could anyone help me?
Thanks a lot,
Regards,
Julio
04-15-2009 01:04 PM
Julio,
Sadly you are trying to configure the "ES - Enhanced Services" ports - which are a different kind of port on the 3750 platform.
HTH>
04-15-2009 01:32 PM
Thank you Andrew!
Do you know if a service policy directy configured in this kind of interface (trunk port) work for packets belonging to the different vlans?
Thanks a lot!
Regards,
Julio
04-15-2009 01:32 PM
Thank you Andrew!
Do you know if a service policy directy configured in this kind of interface (trunk port) work for packets belonging to the different vlans?
Thanks a lot!
Regards,
Julio
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: