Multiple AP support

Unanswered Question
Apr 15th, 2009

Dear

Is there any possibility that multiple APs can be registered with one WLC.

But if we use option 60 it should be re write/ Over write for the VCI string like

Option 60 ascii "Cisco AP c1250"

Option 60 ascii "Cisco AP c1520"

Option 60 ascii "Cisco AP c1130"


i-e- First should be over write by second and second by third :)


Please help me i need combination of outdoor and indoor by mesh.

Regards and Thanks in advance


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Thu, 04/16/2009 - 04:08

"Is there any possibility that multiple APs can be registered with one WLC." < --- Yes. The WLC can "control" from 6 AP's to 150 (soon 500).

gamccall Thu, 04/16/2009 - 05:52

In my experience, option 60 is entirely unnecessary. In a properly designed network, the only DHCP clients on your wireless management network are your APs, so just offer option 43 to all of them.

gamccall Thu, 04/16/2009 - 07:58

The answer to the question you asked, is "yes."


Can you be more specific about what else you would like to know?

Actions

This Discussion