Mesh Configuration

Unanswered Question
Apr 16th, 2009
User Badges:


I have tried to configure some AP's as mesh AP's using WLC4402-12 running (Mesh)software version, working along with Cisco document crn4119235M.

unfortunately i can't find the mesh tab under wireless->AP config...

is there any country restrictions regarding the mesh?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
talmadari Fri, 04/24/2009 - 06:52
User Badges:

Well this is an old guide which instruct how to configure AP1020 and 1030 AP's (which were Airespace models).

I'm looking for how-to with AP1131 models...

Thx anyway

weterry Fri, 04/24/2009 - 20:43
User Badges:
  • Silver, 250 points or more

If the AP Mode is Local, there will be no Mesh TAB. You must change AP Mode to Bridge and apply the configuration. Keep in mind, when you do this, the AP will not join the controller if you have not added the MAC address.

talmadari Fri, 04/24/2009 - 21:36
User Badges:

Thanks, i will try to follow these steps and see what happens.

What about licensing? i read that you have to acquire a license for the controller in order to work in indoor mesh technology.


This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode