04-16-2009 10:52 AM - edited 03-11-2019 08:19 AM
i want to know if anyone call tell me what version of the ASA 8.0 software can i use on a 506E PIX.I've called cisco and they won't tell me because the service contact is no longer valid on the device.
Solved! Go to Solution.
04-16-2009 12:04 PM
You cannot use code 7.x or above for that model, the most you can run on PIX506e model is 6.3.5 code.
If you wanted to upgrade due to looking for new features provided in 7.x or 8.x you will have to upgrade to ASA5505 model which is the upgrade path for the 506 and 506E's.
Regards
04-16-2009 12:04 PM
You cannot use code 7.x or above for that model, the most you can run on PIX506e model is 6.3.5 code.
If you wanted to upgrade due to looking for new features provided in 7.x or 8.x you will have to upgrade to ASA5505 model which is the upgrade path for the 506 and 506E's.
Regards
04-16-2009 01:07 PM
Thanks Jorge
also can you tell me how would i go by deleting the PDM off of the PIX.
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: