Buy or Renew
Buy or Renew
Cisco + Splunk: It’s a new day for your data. Learn more.
 
cancel
Turn on suggestions
Auto-suggest helps you quickly narrow down your search results by suggesting possible matches as you type.
Showing results for 
Search instead for 
Did you mean: 
cancel
Start a conversation
209
Views
0
Helpful
1
Replies

Quick Question regarding DSPs

Go to solution
fabianc
Level 1
Level 1

‎04-16-2009 11:41 AM - edited ‎03-15-2019 05:30 PM

We have a 2811 router with no PVDM installed. This router currently resides in our lab. We have 2 phones configured and an SIP page controller configured as a SIP endpoint. When we run the show voice dsp command we noticed that there are "edsp" that are up and working. My question is what are these dsps and is it safe to call these software DSPs.?

Labels:
0 Helpful
1 Accepted Solution

Accepted Solutions

Go to solution
Kenneth Mohammed
Level 7
Level 7

‎04-16-2009 12:03 PM

Hello,

I am assuming you are using Call Manager Express. These "edsp" that you are referring to are automatically created when you create a new ephone-dn. For example, if you have ephone-dn 1 dual-line, the output of the show voice dsp command will show:

edsp 0001 01 g729r8 p 0.1 IDLE 50/0/1.1

edsp 0002 02 g729r8 p 0.1 IDLE 50/0/1.2

There will be one edsp created for each channel of a particular ephone-dn, which in this case dual-line is configured, as evidenced by the voice-ports 50/0/1.1 and 50/0/1.2.

Hope that helped, if so please rate.

View solution in original post

0 Helpful
1 Reply 1

Go to solution
Kenneth Mohammed
Level 7
Level 7

‎04-16-2009 12:03 PM

Hello,

I am assuming you are using Call Manager Express. These "edsp" that you are referring to are automatically created when you create a new ephone-dn. For example, if you have ephone-dn 1 dual-line, the output of the show voice dsp command will show:

edsp 0001 01 g729r8 p 0.1 IDLE 50/0/1.1

edsp 0002 02 g729r8 p 0.1 IDLE 50/0/1.2

There will be one edsp created for each channel of a particular ephone-dn, which in this case dual-line is configured, as evidenced by the voice-ports 50/0/1.1 and 50/0/1.2.

Hope that helped, if so please rate.

0 Helpful
Customers Also Viewed These Support Documents