RADIUS Port on 7204 VXR

aoyawale · ‎04-17-2009

I have a Cisco 7204VXR Router running c7200p-ipbasek9-mz.124-4.XD5.bin IOS. However, the router only uses the extended source ports (21645 to 21844) for RADIUS authentication despite using the command

"no radius-server source-ports extended"

and reloading. Is there another way to force the router to use the default RADIUS source ports(1645 and 1646)?

Giuseppe Larosa · ‎04-17-2009

Hello Adetola,

have you tried to specify the ports in the same line where you define the radius server ip address ?

Hope to help

Giuseppe

aoyawale · ‎04-17-2009

Hi Giuseppe,

Thanks for your response. I've tried that before and it gives an error at the point where I typed the port number.

Giuseppe Larosa · ‎04-17-2009

Hello Adetola,

have you tried to use

auth-port and acct-port keywords

like in

http://www.cisco.com/en/US/docs/ios/security/command/reference/sec_r1.html#wp1061040

Hope to help

Giuseppe

aoyawale · ‎04-20-2009

Hi Giuseppe,

Unfortunately the hardware has been shipped top site. However, I'll try the setup in GNS3 and let you know the outcome.

Thanks.

Tola