cancel
Showing results for 
Search instead for 
Did you mean: 
cancel
3307
Views
0
Helpful
2
Replies

Packet to client, reached max retries

hegegabor
Level 1
Level 1

Hi all!

I have a problem what I can't resolve.

I have 5 c861W router, and I configured to use WDS. It works fine.

but in the log I see this messages:

Apr 16 08:47:12: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ****.****.**** Reassociated KEY_MGMT[WPAv2-CP]

Apr 16 08:48:10: %DOT11-6-ROAMED: Station ****.****.**** Roamed to ****.****.****

Apr 16 08:48:10: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ****.****.****

Apr 16 08:48:10: %DOT11-4-MAXRETRIES: Packet to client ****.****.**** reached max retries, removing the client

Apr 16 08:49:10: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ****.****.**** Reassociated KEY_MGMT[WPAv2-CP]

Apr 16 08:49:49: %DOT11-6-ROAMED: Station ****.****.**** Roamed to ****.****.****

Apr 16 08:49:49: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ****.****.****

Apr 16 08:49:49: %DOT11-4-MAXRETRIES: Packet to client ****.****.**** reached max retries, removing the client

I tried what guides suggested, I checked the carrier test but all of the channels on 1-10%. I tried to set non overlapping channels as far as i can, and set fragment-threshold to 1024.

I have no idea what is the problem. I thing channels aren't noisy. Not just one client do this, don't think it is a client problem.

Something is missconfigured?

here is a config sample:

interface Dot11Radio0

no ip address

no ip route-cache

encryption vlan 1 mode ciphers tkip

encryption vlan 100 mode ciphers tkip

ssid my_ssid

ssid my_ssid2

channel 2437

fragment-threshold 1024

station-role root

no dot11 extension aironet

!

any idea?

thank you!

1 Accepted Solution
2 Replies 2

Thank you!

I think it could resolve my problem.

I'm going to test it.

Gabor

Review Cisco Networking products for a $25 gift card