04-17-2009 04:17 AM - edited 07-03-2021 05:27 PM
Hi all!
I have a problem what I can't resolve.
I have 5 c861W router, and I configured to use WDS. It works fine.
but in the log I see this messages:
Apr 16 08:47:12: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ****.****.**** Reassociated KEY_MGMT[WPAv2-CP]
Apr 16 08:48:10: %DOT11-6-ROAMED: Station ****.****.**** Roamed to ****.****.****
Apr 16 08:48:10: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ****.****.****
Apr 16 08:48:10: %DOT11-4-MAXRETRIES: Packet to client ****.****.**** reached max retries, removing the client
Apr 16 08:49:10: %DOT11-6-ASSOC: Interface Dot11Radio0, Station ****.****.**** Reassociated KEY_MGMT[WPAv2-CP]
Apr 16 08:49:49: %DOT11-6-ROAMED: Station ****.****.**** Roamed to ****.****.****
Apr 16 08:49:49: %DOT11-6-DISASSOC: Interface Dot11Radio0, Deauthenticating Station ****.****.****
Apr 16 08:49:49: %DOT11-4-MAXRETRIES: Packet to client ****.****.**** reached max retries, removing the client
I tried what guides suggested, I checked the carrier test but all of the channels on 1-10%. I tried to set non overlapping channels as far as i can, and set fragment-threshold to 1024.
I have no idea what is the problem. I thing channels aren't noisy. Not just one client do this, don't think it is a client problem.
Something is missconfigured?
here is a config sample:
interface Dot11Radio0
no ip address
no ip route-cache
encryption vlan 1 mode ciphers tkip
encryption vlan 100 mode ciphers tkip
ssid my_ssid
ssid my_ssid2
channel 2437
fragment-threshold 1024
station-role root
no dot11 extension aironet
!
any idea?
thank you!
Solved! Go to Solution.
04-18-2009 11:44 AM
04-18-2009 11:44 AM
04-21-2009 12:05 AM
Thank you!
I think it could resolve my problem.
I'm going to test it.
Gabor
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: