ACE Configuration Check

Unanswered Question
Apr 17th, 2009


rserver server1

ip address

serverfarm SFARM1

rserver server1 8001

probe Probe_8001

rserver server2 8002

probe Probe_8002

rserver server3 8003

probe Probe_8003

rserver server4 8004

probe Probe_8004

I would like to loadbalance on just one single ip address and multiple ports like

above configuration on ACE. Is It possible configuration? please check

thank you.

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
syjeon Fri, 04/17/2009 - 15:16

ok. thank your response.

I picked up your configuration as follows:

rserver Server1

ip address


serverfarm Farm1

rserver Server1 8001


rserver Server1 8002


rserver Server1 8003


class-map MyVip

match virtual tcp eq 8000

policy type loadbalance http first MyPolicy

class class-default

serverfarm Farm1

policy multimatch SLB

class MyVip

load policy MyPolicy

load vip inservice

interface vlan X

service in SLB

I know that there is no problem to configure one real server attached multiple service port for configuring SLB.

But I must healcheck on each multiple ports although one real server.

for example:

rserver Server1 8001

probe probe_8001


Is it working well?


This Discussion