Boot loop, NVRAM clearable in Rommon?

Unanswered Question

Hi,


i misconfigured the router 26xxXM and now the router won't boot the installed IOS. Following Messages appeares repeadly and the Break Sequence isn't acceppted:

System Bootstrap, Version 12.2(8r) [cmong 8r], RELEASE SOFTWARE (fc1)

Copyright (c) 2003 by cisco Systems, Inc.

C2600 platform with 98304 Kbytes of main memory


loadprog: bad file magic number: 0x0

open: failed to find and/or load the bootloader: "flash:orig.cfg"

loadprog: error - on file open

boot: cannot load "c2600-ik9o3s-mz.123-26.bin"


So how can i clear the NVRAM or factory default, i don't get the Rommon Console.


thanks and regards

Ronny

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Leo Laohoo Fri, 04/17/2009 - 21:06
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Password Recovery Procedure for the Cisco 2600 and 2800 Series Routers


http://www.cisco.com/en/US/products/hw/routers/ps259/products_password_recovery09186a0080094675.shtml

Leo Laohoo Sun, 04/19/2009 - 14:36
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Are you using a USB-to-Serial interface?

Actions

This Discussion