Clients through Mesh AP are unable to get IP

Unanswered Question
Apr 18th, 2009
User Badges:

Dears


I am having 6 APs.Mesh is established and in all APs "Backhaul Client Access" is enabled.Problem is clients are able to get IP through Roof Top AP but not able to get ip from mesh AP.Is there noption i missed ? or any option i require to check or uncheck.

Please reply

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Scott Fella Sat, 04/18/2009 - 08:50
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

So yoiu enabled "Backhaul Client Access" globally on the wlc. So now only 802.11a access will be allowed. So your clients are using 802.11a and not 802.11b/g correct?

asif.naveed Sat, 04/18/2009 - 10:41
User Badges:

Dear


I am sure you are right.But did we enable any client Acess as globally after mesh or keep it as default


Regards

Scott Fella Sat, 04/18/2009 - 11:22
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

If you leave it default then only 802.11bg will be used for client access, otherwise if enabled, only 802.11a will be used for client access.

asif.naveed Sat, 04/18/2009 - 11:28
User Badges:

But clients are not able to get IP address through MESH APs....but through RAP APs clients are able to get IP address


Regards

Scott Fella Sat, 04/18/2009 - 16:54
User Badges:
  • Super Silver, 17500 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 Wireless

Do the client associate to 802.11a or 802.11b/g from the RAP?

Actions

This Discussion