Call Block

charl · ‎04-18-2009

Hi

I've configured Call Block to any mobile number, by means of the prefix that needs to be dialed to place calls to mobile numbers. Problem is that some users need to be able to call their Supervisor on their mobile number. How can we override the block to allow access to predefined list of mobile numbers ?

Jaime Valencia · ‎04-18-2009

create route patterns that match the specific mobiles you need to call

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

esa786_2 · ‎04-18-2009

Hi Jaime, Just creating a route pattern with the mobile of supervisor is enough, or we have to do some other configuratin. pls give the full config info.

Regards

Esa

charl · ‎04-19-2009

Hi, my apologies I shoud've mentioned that is a CME 4.0 installation, so route patterns is probably not available.

Jaime Valencia · ‎04-19-2009

create dial-peers that match the exact mobiles you need to call, same thing just using CME terminology

HTH

java

if this helps, please rate

HTH

java

if this helps, please rate

charl · ‎04-20-2009

Hi, created the dp but this doen not work. The block pattern looks for the 0, and the mobile number starts with 0.

here is my config:

=================

after-hours block pattern 1 0

dial-peer voice 200 pots

description Test block override

destination-pattern 0824476951

port 0/0/0:15

=========================

any ideas ?