WCS AP Templates help. Vlan Override Issue

Unanswered Question
Apr 19th, 2009

Hi all,

WCS ver

When I create a LWAP template, to apply a WLAN override to all my APs, the WLAN I'm looking for is not in the list. Previous WLANs are listed, that are no longer resident on the WLC4404. The current WLAN configured in the WLC does not show up in the list.

I've removed and re-added the WLC a few times to no avail.

Anyone with WCS experience ever see this issue?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
rob.huffman Sun, 04/19/2009 - 15:37

Hi Wayne,

One thing to consider is that is WLC 5.x versions, WLAN Override has been replaced with the "AP Groups" feature;

Creating Access Point Groups

After all access points have joined the controller, you can create up to 150 access point groups and assign up to 16 WLANs to each group. Each access point advertises only the enabled WLANs that belong to its access point group. The access point does not advertise disabled WLANs in its access point group or WLANs that belong to another group.


Hope this helps!



This Discussion



Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode