Cisco EnergyWise-How to configure

Unanswered Question
Apr 19th, 2009
User Badges:

As i was reading the Ask the Expert topic about EnergyWise in cisco switches,one question comes in my mind about how to configure it on a Cisco 3550 switch which can turn off or switch off the Cisco VoIP phones and Cisco APs at a fixed time.

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 4 (1 ratings)
Loading.
Leo Laohoo Sun, 04/19/2009 - 16:59
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Firstly, you need to to use IOS version 12.2(50)SE.


Unfortunately, there are no Configuration Examples yet for EnergyWise but you might as well look at the commands:


http://www.cisco.com/en/US/docs/switches/lan/catalyst3750/software/release/12.2_50_se/command/reference/cli1.html#wp10904924


Hope this helps.

Leo Laohoo Mon, 04/20/2009 - 15:10
User Badges:
  • Super Gold, 25000 points or more
  • Hall of Fame,

    The Hall of Fame designation is a lifetime achievement award based on significant overall achievements in the community. 

  • Cisco Designated VIP,

    2017 LAN, Wireless

Thanks for the rating.

Actions

This Discussion