04-19-2009 04:52 PM - edited 03-06-2019 05:16 AM
As i was reading the Ask the Expert topic about EnergyWise in cisco switches,one question comes in my mind about how to configure it on a Cisco 3550 switch which can turn off or switch off the Cisco VoIP phones and Cisco APs at a fixed time.
04-19-2009 04:59 PM
Firstly, you need to to use IOS version 12.2(50)SE.
Unfortunately, there are no Configuration Examples yet for EnergyWise but you might as well look at the commands:
Hope this helps.
04-20-2009 09:42 AM
Thank you
04-20-2009 03:10 PM
Thanks for the rating.
04-20-2009 10:52 PM
I've noticed some configuration examples in Chapter 4 of the Catalyst 2960 12.2(50)SE Software Configuration Guide, available to download from http://www.cisco.com/en/US/docs/switches/lan/catalyst2960/software/release/12.2_50_se/configuration/guide/scg.html
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide