How to change ip address in cisco 2960 series switch?

Unanswered Question
Apr 20th, 2009

How to change ip address in cisco 2960 series switch?

I have this problem too.
0 votes
  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Collin Clark Mon, 04/20/2009 - 05:18

Switch#

Switch#config terminal

Switch(config)#interface vlan 1

Switch(config-int)#ip address 192.168.1.5 255.255.255.0

I'm assuming your changing VLAN1's IP, so if you use a different one for management, go to that interface. Once you hit enter the change takes place immediately. You will then need to connect to the new address and save the config. You may also have to change the ip default-gateway. It's best to make these changes from the console.

Hope that helps.

Leo Laohoo Tue, 04/23/2013 - 14:59

Yes you can.  Just cut-and-replace what you have (IP Address) with the example Collin has posted.

InayathUlla Sharieff Tue, 04/23/2013 - 20:26

Easy one for me.

Switch#

Switch#config terminal

Switch(config)#interface vlan 1

Switch(config-int)#ip address 192.168.1.3 255.255.255.0

HTH

Regards

Inayath

Actions

This Discussion