How to change ip address in cisco 2960 series switch?

vinothlb1 · ‎04-20-2009

Collin Clark · ‎04-20-2009

Switch#

Switch#config terminal

Switch(config)#interface vlan 1

Switch(config-int)#ip address 192.168.1.5 255.255.255.0

I'm assuming your changing VLAN1's IP, so if you use a different one for management, go to that interface. Once you hit enter the change takes place immediately. You will then need to connect to the new address and save the config. You may also have to change the ip default-gateway. It's best to make these changes from the console.

Hope that helps.

Kristian Leth · ‎04-23-2013

Could you try to create the command?

im using ip 192.168.1.3

Leo Laohoo · ‎04-23-2013

Yes you can. Just cut-and-replace what you have (IP Address) with the example Collin has posted.

InayathUlla Sharieff · ‎04-23-2013

Easy one for me.

Switch#

Switch#config terminal

Switch(config)#interface vlan 1

Switch(config-int)#ip address 192.168.1.3 255.255.255.0

HTH

Regards

Inayath