I tried to install 12.4(X)T on this chassis to support PA-MC-2T3-EC. "Show fac status" gives me the following:
Router#sh facility-alarm sta
System Totals Critical: 1 Major: 0 Minor: 0
Source Severity Description [Index]
------ -------- -------------------
SFP Slot 0/3 CRITICAL SFP is missing 
Cisco version SFP is in and interface is UP and UP.
Router#sh int g0/3
GigabitEthernet0/3 is up, line protocol is up
Hardware is i82546, address is 0024.97a6.ee17 (bia 0024.97a6.ee17)
Internet address is 184.108.40.206/24
MTU 1500 bytes, BW 1000000 Kbit, DLY 10 usec,
reliability 255/255, txload 1/255, rxload 1/255
Encapsulation ARPA, loopback not set
Keepalive set (10 sec)
Full-duplex, 1000Mb/s, link type is autonegotiation, media type is LX
output flow-control is XON, input flow-control is XON
Research on bug didn't find any. There is one reported as chipset i82546 on g0/3 was missing many IOS command to retrieve information CSCsq58662. The other ports are regular NPE-G2 chipset.
Any one come about this problem and what was the resolution from Cisco.