04-20-2009 07:34 AM - edited 03-11-2019 08:20 AM
I have a ASA5510 which should have 4 10/100 ports and a 10/100 management port. I am unable to access or configure e0/3. Is this a limitation of the Base license? Or a limitation of 7.0(8)???
Here is the sh ver... it doesn't make much sense interms of supported VLAN's or VPN peers either.
Maximum Physical Interfaces : 4
Maximum VLANs : 10
Inside Hosts : Unlimited
Failover : Disabled
VPN-DES : Enabled
VPN-3DES-AES : Enabled
Security Contexts : 0
GTP/GPRS : Disabled
VPN Peers : 50
04-20-2009 07:35 AM
Hi,
Upgrade the software to version 8.0, you can then access e0/3. Also install ASDM 6.x, software 8.0 doesn't support asdm 5.x.
H2H
Roshan
04-20-2009 07:37 AM
is there any documentation on 7.08 that states e03 is not available... I have other 5510's that have this interface enabled...
Which version is the first one to support all 4 interface?
I have asa708-k8.bin
04-20-2009 07:49 AM
Hi,
As far as i remember, initially Cisco unlocked e0/3 with security plus license.
But, with experience last month, 3 cisco asa was shipped with software version 7.0 and base license. The cisco asdm cd contains software 8.0 and asdm 6.x after installing and booting using software 8.0, I was able to use interface e0/3.
H2H
Roshan
04-21-2009 10:29 PM
07-16-2009 05:09 PM
Doesn't anyone have an answer for this? Seems like I am not the only one here.
07-16-2009 05:10 PM
Doesn't anyone have an answer for this? Seems like I am not the only one here.
07-19-2009 04:31 AM
A Security Plus license will give you access to all interfaces. In addition, running v7.2.3 code at a minimum will make e0/0 and e0/0 10/100/1000 interfaces.
07-21-2009 05:51 AM
Hi,
I have faced same problem, when i purchased my ASA 5510 it was with 7.0 IOS with 4 int and with only 50 VPN peer license, But when i upgrade my IOS to 8.0-K8 security bundle, I was able to use all 5 intf, with 250 VPN peer, 2 SSL peer, also with an ability to convert 5 intf into a normal intf i.e "No managment-only" command starts working
Regards,
Hussain
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: