VSS ether channel and voice gateways and Call Manager

Unanswered Question
Apr 20th, 2009

I have 1 voice gws with 2 gigabit ethernet gi0/0 and gi0/1 and it is going to be connected via VSS to 2x 6509s.

My question is can i setup a ether-channel with the 2 gigabit ethernets with each gi0/0 physically connected to switch 1 and gi0/1 physically connected to switch 2.

And can i setup cisco call manager to register with the ether-channel interface? Is this a supported configuration for Call MAnager 7.x


  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
gogasca Mon, 04/20/2009 - 15:39

Nop, thats not supported

We support NIC teaming for NIC redundancy. You can find out more about NIC teaming configuration in this forum or in cisco.com

nathanaelb1 Wed, 06/25/2014 - 09:22

What is supported on Communication Manager 9.x for NIC / link redundancy on Cisco 29xx ISR G2s?




This Discussion