04-20-2009 12:44 PM - edited 03-15-2019 05:33 PM
I have 1 voice gws with 2 gigabit ethernet gi0/0 and gi0/1 and it is going to be connected via VSS to 2x 6509s.
My question is can i setup a ether-channel with the 2 gigabit ethernets with each gi0/0 physically connected to switch 1 and gi0/1 physically connected to switch 2.
And can i setup cisco call manager to register with the ether-channel interface? Is this a supported configuration for Call MAnager 7.x
thanks
04-20-2009 03:39 PM
Nop, thats not supported
We support NIC teaming for NIC redundancy. You can find out more about NIC teaming configuration in this forum or in cisco.com
06-25-2014 09:22 AM
What is supported on Communication Manager 9.x for NIC / link redundancy on Cisco 29xx ISR G2s?
Discover and save your favorite ideas. Come back to expert answers, step-by-step guides, recent topics, and more.
New here? Get started with these tips. How to use Community New member guide