Catalyst 6500

Unanswered Question
Apr 20th, 2009
User Badges:

All,

I am suspecting some loop issue in my LAN. Below is my switch show cam result.

VLAN Dest MAC/Route Des [CoS] Destination Ports or VCs / [Protocol Type]

---- ------------------ ----- -------------------------------------------

21 00-11-0a-33-c5-82 2/2 [IP]

20 00-11-0a-33-c5-82 15/2 [IP]

22 00-11-0a-33-c5-82 15/2 [IP]

17 00-11-0a-33-c5-82 15/2 [IP]

16 00-11-0a-33-c5-82 15/2 [IP]

18 00-11-0a-33-c5-82 15/2 [IP]

12 00-11-0a-33-c5-82 15/2 [IP]

13 00-11-0a-33-c5-82 15/2 [IP]

14 00-11-0a-33-c5-82 15/2 [IP]

15 00-11-0a-33-c5-82 15/2 [IP]

11 00-11-0a-33-c5-82 15/2 [IP]

Total Matching CAM Entries Displayed =11


If the port is 15/1 its a msfc.What is port 15/2?.


********> show version

WS-C6509 Software, Version NmpSW: 6.3(2)

Copyright (c) 1995-2001 by Cisco Systems

NMP S/W compiled on Oct 4 2001, 23:44:35


System Bootstrap Version: 6.1(4)


Hardware Version: 3.0 Model: WS-C6509 Serial #: TBP05490023


PS1 Module: WS-CAC-2500W Serial #: ART054800CS

PS2 Module: WS-CAC-2500W Serial #: ART054800G8


Mod Port Model Serial # Versions

--- ---- ------------------- ----------- --------------------------------------

1 2 WS-X6K-SUP2-2GE SAD054102TA Hw : 3.2

Fw : 6.1(4)

Fw1: 6.1(3)

Sw : 6.3(2)

Sw1: 6.3(2)

WS-F6K-PFC2 SAD054104UG Hw : 2.0

2 2 WS-X6K-SUP2-2GE SAD054102P7 Hw : 3.2

Fw : 6.1(4)

Fw1: 6.1(3)

Sw : 6.3(2)

Sw1: 6.3(2)

WS-F6K-PFC2 SAD054104HU Hw : 2.0

3 48 WS-X6348-RJ-45 SAL0547ETXF Hw : 6.0

Fw : 5.4(2)

Sw : 6.3(2)

WS-F6K-VPWR Hw : 1.0

4 48 WS-X6348-RJ-45 SAL0547ENV1 Hw : 6.0

Fw : 5.4(2)

Sw : 6.3(2)

WS-F6K-VPWR Hw : 1.0

5 48 WS-X6348-RJ-45 SAL0547ESP9 Hw : 6.0

Fw : 5.4(2)

Sw : 6.3(2)

WS-F6K-VPWR Hw : 1.0

7 48 WS-X6348-RJ-45 SAL06355A00 Hw : 6.1

Fw : 5.4(2)

Sw : 6.3(2)

WS-F6K-VPWR Hw : 1.0

8 8 WS-X6408A-GBIC SAL08123ATX Hw : 3.0

Fw : 5.4(2)

Sw : 6.3(2)

9 8 WS-X6408A-GBIC SAL08123AQA Hw : 3.0

Fw : 5.4(2)

Sw : 6.3(2)

15 1 WS-F6K-MSFC2 SAD054105U1 Hw : 1.2

Fw : 12.1(8a)E5

Sw : 12.1(8a)E5

16 1 WS-F6K-MSFC2 SAD054106CN Hw : 1.2

Fw : 12.1(8a)E5

Sw : 12.1(8a)E5


DRAM FLASH NVRAM

Module Total Used Free Total Used Free Total Used Free

------ ------- ------- ------- ------- ------- ------- ----- ----- -----

1 130944K 63378K 67566K 32768K 15002K 17766K 512K 361K 151K



  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Jon Marshall Mon, 04/20/2009 - 19:56
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

"If the port is 15/1 its a msfc.What is port 15/2?"


You have redundant supervisors in your chassis so 15/2 is the MSFC in your second supervisor.


Jon

gopinath.j Mon, 04/20/2009 - 20:26
User Badges:

Jon,

Yes I have redundant sup engine but it is port 16/1.

Will the mac learn via msfc card also?


Jon Marshall Tue, 04/21/2009 - 01:41
User Badges:
  • Super Blue, 32500 points or more
  • Hall of Fame,

    Founding Member

  • Cisco Designated VIP,

    2017 LAN, WAN

"Yes I have redundant sup engine but it is port 16/1."


My mistake - good point :-)


Jon

Actions

This Discussion