Any experience with Windows 2008 NPS and WLC

Unanswered Question
Apr 20th, 2009

Anyone had success using Windows 2008 NPS with a WLC to authenticate wireless users via RADIUS.


Was finding that I could get machine accounts to authenticate successfully against NPS and get on the wireless networks. If client user accounts attempted to authenticate it would fail.


I moved back to Windows 2003 IAS and things work fine. I was seeing Authenticate-Reject messages on the WLC debug when going against the NPS box but the logging on NPS is abhorrent and wasn't giving me any suggestions on why things were being rejected.


Anyone experienced the same?

  • 1
  • 2
  • 3
  • 4
  • 5
Overall Rating: 0 (0 ratings)
Loading.
Geert Reijnders Tue, 01/10/2012 - 02:20

Hi Nathan,


Did you resolve this issue. I am experiencing the same issue right now.


Thanks for your reply.


Greetz


Geert

Scott Fella Tue, 01/10/2012 - 04:32

Are you trying to authentic just users and not machine? On NPS you can only authenticate one or the other and not both. On ACS you can do both.


Thanks,


Scott Fella


Sent from my iPhone

Geert Reijnders Tue, 01/10/2012 - 04:44

We are trying to authenticate just users.


Met vriendelijke groeten,

Cliënt ICT Groep

Geert Reijnders



Van: fella5

Verzonden: dinsdag 10 januari 2012 13:33

Aan: Geert Reijnders

Onderwerp: - Re: Any experience with Windows 2008 NPS and WLC


Home


Re: Any experience with Windows 2008 NPS and WLC

created by Scott Fella in Other Wireless - Mobility Subjects - View the full discussion

Scott Fella Tue, 01/10/2012 - 05:07

Okay... So can you post a screen shot of the NPS connection and network policy and also the failed log in the event viewer. Are you able to do machine authentication at least?


Thanks,


Scott Fella


Sent from my iPhone

Actions

This Discussion

 

 

Trending Topics: Other Wireless Mobility

client could not be authenticated
Network Analysis Module (NAM) Products
Cisco 6500 nam
reason 440 driver failure
Cisco password cracker
Cisco Wireless mode