04-20-2009 10:16 PM
I have requirement where customer wants ip dialing to LNS from cisco router with the help of l2tpv3.
Could anyone tell me how to configure this.
regards
shivlu jain
04-27-2009 11:35 AM
Hello Shivlu,
in one of our routers the backup link is configured in this way
pseudowire-class netvision-l2tp
encapsulation l2tpv2
!
interface Virtual-PPP1
description NETVISION DIALER
ip address negotiated
ip nat outside
ip virtual-reassembly
no cdp enable
ppp pap sent-username
pseudowire x.x.x.x 2 pw-class netvision-l2tp
crypto map VPN_MAP
!
where x.x.x.x is a public ip address
ip route x.x.x.x 255.255.255.255 g0/1
completes this solution where this g0/1
sh run int gi0/1
Building configuration...
Current configuration : 157 bytes
!
interface GigabitEthernet0/1
description CONNECTION TO CABLE MODEM
ip address dhcp
ip virtual-reassembly
duplex auto
speed auto
media-type rj45
end
and it receives a private ip address from DHCP on a cable modem access network.
but it uses l2tpv2 not L2tpv3 and I've always seen l2tpv2 in this context.
Hope to help
Giuseppe
04-27-2009 09:07 PM
hi Giuseppe
I already got the solution and it is the same as provided by you.
Really thanks for your help.
regards
shivlu jain
04-28-2009 04:09 AM
Hello Shivlu,
and is it working with L2TPv3 ?
Best Regards
Giuseppe
04-28-2009 05:01 AM
hi Giuseppe
It is working with l2tpv2
regards
shivlu jain
Find answers to your questions by entering keywords or phrases in the Search bar above. New here? Use these resources to familiarize yourself with the community: