I am a relative newb to the UC500 system so forgive me if this question has already been posted, I tried to do a search but couldn't find any relavent documents. Anywho, I recently downloaded and installed the 7.1 early release pack. Everything runs through smoothly however, when I look at my CME it tells me it is still version 4.2. My question is how can I run the CME upgrade using the CLI or just run the CME upgrade independantly without upgrading the additional components?
Did you do this upgrade via CLI? If so, you probably need to get the CME gui files that go with this upgrade. You should also see what path you have configured for the GUI to use.
ip http path flash:/gui
should be in your config.
You are running 7.1 on that IOS. Issue the following command:
show telephony-service | inc Version
Technical Marketing Engineer
Cisco Systems, Inc.
The CME version depends on the IOS version you have. If you upgraded the IOS, CME should be 7.1...
Can you share a "show version" ?